Radon levels in San Benito County, California

LowEPA Zone 2

Predicted long-term basement average of 1.6 pCi/L (model estimate) across 3 ZIP codes - close to the US average of 1.8, close to the California average of 1.5. Ranked #21 of 58 California counties.

Test San Benito County, CA once anyway - radon varies house to house

The predicted basement average here is 1.6 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.6 ± 0.07

pCi/L predicted basement mean (model SD)

0.8 ± 0.07

pCi/L predicted upstairs (above-ground) mean

1.6-2.1

range of ZIP-level basement predictions in the county

What this means for San Benito

The typical San Benito County home is predicted below 2 pCi/L, the lowest band. That is the best case an area can show - but it describes the average house, and the ZIP-level predictions within the county still span 1.6 to 2.1 pCi/L.

Note that the EPA classifies San Benito County as Zone 2 while the newer model predicts 1.6 pCi/L. The zone map predates two decades of test data; where they disagree, we grade on the model but show both. County figures weight each ZIP by its 2010 Census population, so they describe where people live rather than empty land.

Comparable California counties: San Luis Obispo County (1.6), Ventura County (1.6), Butte County (1.6), Shasta County (1.6). The state's highest is Mono County at 2.7 pCi/L.

ZIP codes in San Benito County

Predicted basement and upstairs means by ZIP (model estimate). ZIPs whose land is mostly in this county.

ZIPBasementUpstairsGrade
950231.6 ± 0.070.8Low
950451.6 ± 0.070.9Low
950432.1 ± 0.071.2Moderate

If your test comes back at 4 pCi/L or higher

Mitigation is a routine job: a fan-driven pipe that vents soil gas from under the slab to above the roofline, typically $800-$2,500 installed (typical range; local quotes vary). Use certified professionals: EPA find-a-professional. Read the full mitigation guide.

San Benito County radon questions

Is radon high in San Benito County, California?
Low. The model predicts a long-term basement average of 1.6 pCi/L in San Benito County (close to the US average of 1.8 and close to the California average of 1.5). That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Ranked 21 of 58 California counties.
Should I test for radon in San Benito County?
Yes, once. The EPA recommends testing every home regardless of area, and the model's ZIP-level predictions in San Benito County already range from 1.6 to 2.1 pCi/L. A short-term kit costs little and settles the question for your house.
What does EPA Radon Zone 2 mean for San Benito County?
Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and classifies whole counties. The newer model's predicted average of 1.6 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.
How much does radon mitigation cost in San Benito County?
A standard active sub-slab depressurization system typically runs $800-$2,500 installed nationally; California quotes vary with foundation type (slab, crawlspace, basement), home size and local labor. Get two or three bids from certified mitigators listed by your state radon program or the EPA's find-a-professional page.

← All California counties · How to test · Radon in a home sale · Methodology