Is radon high in San Tan Valley, Arizona?

Low. Averaging the model's ZIP-code predictions across San Tan Valley (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.7 pCi/L - close to the US average of 1.8 and close to the Arizona average of 1.7. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. San Tan Valley ranks 22 of 27 Arizona cities on this site.

Which San Tan Valley ZIP codes have the highest radon?

Predictions for the 3 modeled ZIP codes in San Tan Valley range from 1.7 to 1.7 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in San Tan Valley?

Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; San Tan Valley's low predicted average describes the typical home, not yours.

What does EPA Radon Zone 2 mean for San Tan Valley?

San Tan Valley sits mainly in Pinal County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.7 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

Radon levels in San Tan Valley, Arizona

LowEPA Zone 2

Predicted long-term basement average of 1.7 pCi/L (model estimate) across the 3 modeled ZIP codes in San Tan Valley - close to the US average of 1.8, close to the Arizona average of 1.7. Ranked #22 of 27 Arizona cities on this site. Most of the census-designated place lies in Pinal County.

Test San Tan Valley, AZ once anyway - radon varies house to house

The predicted basement average here is 1.7 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

Get a short-term test kit →Or track it with a continuous monitor

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.7 ± 0.06

pCi/L predicted basement mean (model SD)

1.0 ± 0.07

pCi/L predicted upstairs (above-ground) mean

1.7-1.7

range of ZIP-level basement predictions in the city

of San Tan Valley ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for San Tan Valley

The typical San Tan Valley home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.7 to 1.7 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the census-designated place's land in each ZIP (Census 2020 ZCTA-to-place relationship file). Note that the EPA classifies Pinal County as Zone 2 while the newer model predicts 1.7 pCi/L for San Tan Valley; where they disagree, we grade on the model but show both.

Comparable Arizona cities: Queen Creek (1.7), Glendale (1.7), Mesa (1.7), Chandler (1.6).

ZIP codes in San Tan Valley

ZIPs that overlap the census-designated place, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
85142	34%	1.7 ± 0.07	0.9	Low
85140	34%	1.7 ± 0.07	1.0	Low
85143	33%	1.7 ± 0.06	1.0	Low

Testing help in Arizona

Arizona's radon program page is at www.azdhs.gov; it lists testing and certified-mitigator guidance. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

San Tan Valley radon questions

Is radon high in San Tan Valley, Arizona?: Low. Averaging the model's ZIP-code predictions across San Tan Valley (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.7 pCi/L - close to the US average of 1.8 and close to the Arizona average of 1.7. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. San Tan Valley ranks 22 of 27 Arizona cities on this site.
Which San Tan Valley ZIP codes have the highest radon?: Predictions for the 3 modeled ZIP codes in San Tan Valley range from 1.7 to 1.7 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in San Tan Valley?: Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; San Tan Valley's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 2 mean for San Tan Valley?: San Tan Valley sits mainly in Pinal County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.7 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

← All Arizona counties and cities · Pinal County · How to test · Methodology