Radon levels in Bonita Springs, Florida

LowEPA Zone 3

Predicted long-term basement average of 1.6 pCi/L (model estimate) across the 5 modeled ZIP codes in Bonita Springs - close to the US average of 1.8, about 1.2× the Florida average of 1.3. Ranked #1 of 89 Florida cities on this site. Most of the city lies in Lee County (its ZIPs also reach into 1 other county).

Test Bonita Springs, FL once anyway - radon varies house to house

The predicted basement average here is 1.6 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.6 ± 0.07

pCi/L predicted basement mean (model SD)

2.1 ± 0.11

pCi/L predicted upstairs (above-ground) mean

1.2-1.6

range of ZIP-level basement predictions in the city

0%

of Bonita Springs ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Bonita Springs

The typical Bonita Springs home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.2 to 1.6 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). The 1993 EPA zone (3) for Lee and the 2001-2021 model agree here.

Comparable Florida cities: Wellington (1.5), Ocala (1.5), Gainesville (1.5), Cape Coral (1.4).

ZIP codes in Bonita Springs

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIPShare of cityBasementUpstairsGrade
3413569%1.6 ± 0.072.3Low
3413426%1.4 ± 0.071.6Low
341102%1.3 ± 0.081.5Low
339312%1.2 ± 0.091.2Low
341191%1.4 ± 0.071.4Low

Testing help in Florida

Florida's radon program page is at www.floridahealth.gov and, when we checked it, offered a free radon test kit on request. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Bonita Springs radon questions

Is radon high in Bonita Springs, Florida?
Low. Averaging the model's ZIP-code predictions across Bonita Springs (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.6 pCi/L - close to the US average of 1.8 and about 1.2× the Florida average of 1.3. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Bonita Springs ranks 1 of 89 Florida cities on this site.
Which Bonita Springs ZIP codes have the highest radon?
Predictions for the 5 modeled ZIP codes in Bonita Springs range from 1.2 to 1.6 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Bonita Springs?
Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Bonita Springs's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 3 mean for Bonita Springs?
Bonita Springs sits mainly in Lee County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

← All Florida counties and cities · Lee County · How to test · Methodology