Radon levels in Fort Pierce, Florida

LowEPA Zone 3

Predicted long-term basement average of 1.2 pCi/L (model estimate) across the 7 modeled ZIP codes in Fort Pierce - about 34% below the US average of 1.8, close to the Florida average of 1.3. Ranked #63 of 89 Florida cities on this site. Most of the city lies in St. Lucie County.

Test Fort Pierce, FL once anyway - radon varies house to house

The predicted basement average here is 1.2 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.2 ± 0.08

pCi/L predicted basement mean (model SD)

0.8 ± 0.08

pCi/L predicted upstairs (above-ground) mean

1.1-1.4

range of ZIP-level basement predictions in the city

0%

of Fort Pierce ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Fort Pierce

The typical Fort Pierce home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.1 to 1.4 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). The 1993 EPA zone (3) for St. Lucie and the 2001-2021 model agree here.

Comparable Florida cities: Coconut Creek (1.2), Sarasota (1.2), Winter Haven (1.2), Orlando (1.2).

ZIP codes in Fort Pierce

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIPShare of cityBasementUpstairsGrade
3498224%1.2 ± 0.070.8Low
3495021%1.1 ± 0.080.7Low
3498121%1.3 ± 0.071.0Low
3494715%1.1 ± 0.080.6Low
3494511%1.4 ± 0.071.0Low
349496%1.2 ± 0.080.8Low
349462%1.2 ± 0.080.7Low

Testing help in Florida

Florida's radon program page is at www.floridahealth.gov and, when we checked it, offered a free radon test kit on request. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Fort Pierce radon questions

Is radon high in Fort Pierce, Florida?
Low. Averaging the model's ZIP-code predictions across Fort Pierce (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.2 pCi/L - about 34% below the US average of 1.8 and close to the Florida average of 1.3. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Fort Pierce ranks 63 of 89 Florida cities on this site.
Which Fort Pierce ZIP codes have the highest radon?
Predictions for the 7 modeled ZIP codes in Fort Pierce range from 1.1 to 1.4 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Fort Pierce?
Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Fort Pierce's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 3 mean for Fort Pierce?
Fort Pierce sits mainly in St. Lucie County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

← All Florida counties and cities · St. Lucie County · How to test · Methodology