Radon levels in Riverview, Florida
LowEPA Zone 2Predicted long-term basement average of 1.3 pCi/L (model estimate) across the 4 modeled ZIP codes in Riverview - about 26% below the US average of 1.8, close to the Florida average of 1.3. Ranked #17 of 89 Florida cities on this site. Most of the census-designated place lies in Hillsborough County.
Test Riverview, FL once anyway - radon varies house to house
The predicted basement average here is 1.3 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.
We may earn a commission from Amazon at no extra cost to you.
Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.
1.3 ± 0.06
pCi/L predicted basement mean (model SD)
0.9 ± 0.11
pCi/L predicted upstairs (above-ground) mean
1.3-1.4
range of ZIP-level basement predictions in the city
0%
of Riverview ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)
What this means for Riverview
The typical Riverview home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.3 to 1.4 pCi/L.
The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the census-designated place's land in each ZIP (Census 2020 ZCTA-to-place relationship file). Note that the EPA classifies Hillsborough County as Zone 2 while the newer model predicts 1.3 pCi/L for Riverview; where they disagree, we grade on the model but show both.
Comparable Florida cities: Palm Bay (1.3), Palm Coast (1.3), Melbourne (1.3), Lehigh Acres (1.3).
ZIP codes in Riverview
ZIPs that overlap the census-designated place, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.
| ZIP | Share of city | Basement | Upstairs | Grade |
|---|---|---|---|---|
| 33579 | 45% | 1.3 ± 0.06 | 1.1 | Low |
| 33569 | 28% | 1.4 ± 0.06 | 0.9 | Low |
| 33578 | 25% | 1.3 ± 0.06 | 0.7 | Low |
| 33534 | 2% | 1.3 ± 0.06 | 0.9 | Low |
Testing help in Florida
Florida's radon program page is at www.floridahealth.gov and, when we checked it, offered a free radon test kit on request. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.
Riverview radon questions
- Is radon high in Riverview, Florida?
- Low. Averaging the model's ZIP-code predictions across Riverview (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.3 pCi/L - about 26% below the US average of 1.8 and close to the Florida average of 1.3. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Riverview ranks 17 of 89 Florida cities on this site.
- Which Riverview ZIP codes have the highest radon?
- Predictions for the 4 modeled ZIP codes in Riverview range from 1.3 to 1.4 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
- Should I test for radon in Riverview?
- Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Riverview's low predicted average describes the typical home, not yours.
- What does EPA Radon Zone 2 mean for Riverview?
- Riverview sits mainly in Hillsborough County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.3 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.
← All Florida counties and cities · Hillsborough County · How to test · Methodology