Is radon high in Arlington Heights, Illinois?

Low. Averaging the model's ZIP-code predictions across Arlington Heights (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.6 pCi/L - close to the US average of 1.8 and about 17% below the Illinois average of 1.9. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Arlington Heights ranks 21 of 34 Illinois cities on this site.

Which Arlington Heights ZIP codes have the highest radon?

Predictions for the 2 modeled ZIP codes in Arlington Heights range from 1.5 to 1.7 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in Arlington Heights?

Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Arlington Heights's low predicted average describes the typical home, not yours.

What does EPA Radon Zone 2 mean for Arlington Heights?

Arlington Heights sits mainly in Cook County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.6 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

Radon levels in Arlington Heights, Illinois

LowEPA Zone 2

Predicted long-term basement average of 1.6 pCi/L (model estimate) across the 2 modeled ZIP codes in Arlington Heights - close to the US average of 1.8, about 17% below the Illinois average of 1.9. Ranked #21 of 34 Illinois cities on this site. Most of the city lies in Cook County.

Test Arlington Heights, IL once anyway - radon varies house to house

The predicted basement average here is 1.6 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

Get a short-term test kit →Or track it with a continuous monitor

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.6 ± 0.08

pCi/L predicted basement mean (model SD)

1.1 ± 0.07

pCi/L predicted upstairs (above-ground) mean

1.5-1.7

range of ZIP-level basement predictions in the city

of Arlington Heights ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Arlington Heights

The typical Arlington Heights home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.5 to 1.7 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). Note that the EPA classifies Cook County as Zone 2 while the newer model predicts 1.6 pCi/L for Arlington Heights; where they disagree, we grade on the model but show both.

Comparable Illinois cities: Mount Prospect (1.5), Glenview (1.6), Tinley Park (1.5), Wheaton (1.5).

ZIP codes in Arlington Heights

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
60004	64%	1.5 ± 0.07	1.2	Low
60005	36%	1.7 ± 0.08	1.0	Low

Testing help in Illinois

Illinois's radon program page is at iemaohs.illinois.gov and, when we checked it, offered low-cost test kits. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Arlington Heights radon questions

Is radon high in Arlington Heights, Illinois?: Low. Averaging the model's ZIP-code predictions across Arlington Heights (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.6 pCi/L - close to the US average of 1.8 and about 17% below the Illinois average of 1.9. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Arlington Heights ranks 21 of 34 Illinois cities on this site.
Which Arlington Heights ZIP codes have the highest radon?: Predictions for the 2 modeled ZIP codes in Arlington Heights range from 1.5 to 1.7 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Arlington Heights?: Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Arlington Heights's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 2 mean for Arlington Heights?: Arlington Heights sits mainly in Cook County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.6 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

← All Illinois counties and cities · Cook County · How to test · Methodology