Is radon high in Portland, Maine?

Moderate. Averaging the model's ZIP-code predictions across Portland (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 2.1 pCi/L - close to the US average of 1.8 and close to the Maine average of 2.2. That is in the 2-4 pCi/L range where the EPA says to consider fixing. Portland ranks 1 of 1 Maine cities on this site.

Which Portland ZIP codes have the highest radon?

Predictions for the 5 modeled ZIP codes in Portland range from 1.4 to 2.4 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 60% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in Portland?

Yes, soon. With a predicted basement average of 2.1 pCi/L, a meaningful share of Portland homes will test above the 4 pCi/L action level. Start with a short-term kit; if it reads 2 or higher, confirm with a long-term test or a continuous monitor before paying for mitigation.

What does EPA Radon Zone 1 mean for Portland?

Portland sits mainly in Cumberland County, which the EPA classifies as Zone 1 - highest potential (predicted average > 4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 2.1 pCi/L does not line up with Zone 1, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

Radon levels in Portland, Maine

ModerateEPA Zone 1

Predicted long-term basement average of 2.1 pCi/L (model estimate) across the 5 modeled ZIP codes in Portland - close to the US average of 1.8, close to the Maine average of 2.2. Ranked #1 of 1 Maine cities on this site. Most of the city lies in Cumberland County.

Test Portland, ME - the EPA says "consider fixing" in this range

The predicted basement average here is 2.1 pCi/L, in the 2-4 pCi/L band where the EPA recommends considering mitigation. Plenty of individual homes in a moderate area test above 4. Start with a short-term test; if it comes back at 2 or higher, follow up with a long-term test or a continuous monitor.

Get a short-term test kit →Or track it with a continuous monitor

Already tested at 4 pCi/L or higher? Find a certified mitigation professional (EPA). A mitigation system typically runs $800-$2,500 installed.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

2.1 ± 0.06

pCi/L predicted basement mean (model SD)

1.4 ± 0.07

pCi/L predicted upstairs (above-ground) mean

1.4-2.4

range of ZIP-level basement predictions in the city

of Portland ZIPs predicted ≥ 4 pCi/L (60% ≥ 2)

What this means for Portland

The typical Portland home is predicted in the 2-4 pCi/L band. The EPA's guidance for this range is to consider fixing, because there is no known safe level and a meaningful minority of homes in a moderate area will test above 4.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). Note that the EPA classifies Cumberland County as Zone 1 while the newer model predicts 2.1 pCi/L for Portland; where they disagree, we grade on the model but show both.

Comparable Maine cities: Manchester (2.0), Nashua (2.1), Concord (2.0).

ZIP codes in Portland

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
04103	48%	2.2 ± 0.07	1.5	Moderate
04102	28%	1.9 ± 0.05	1.3	Low
04101	9%	1.4 ± 0.09	0.9	Low
04109	6%	2.4 ± 0.07	1.7	Moderate
04108	6%	2.2 ± 0.07	1.6	Moderate
04019	4%	—	—	no model

Testing help in Maine

We link only state program pages we could verify, and Maine's did not respond when we checked, so start from the EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Portland radon questions

Is radon high in Portland, Maine?: Moderate. Averaging the model's ZIP-code predictions across Portland (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 2.1 pCi/L - close to the US average of 1.8 and close to the Maine average of 2.2. That is in the 2-4 pCi/L range where the EPA says to consider fixing. Portland ranks 1 of 1 Maine cities on this site.
Which Portland ZIP codes have the highest radon?: Predictions for the 5 modeled ZIP codes in Portland range from 1.4 to 2.4 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 60% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Portland?: Yes, soon. With a predicted basement average of 2.1 pCi/L, a meaningful share of Portland homes will test above the 4 pCi/L action level. Start with a short-term kit; if it reads 2 or higher, confirm with a long-term test or a continuous monitor before paying for mitigation.
What does EPA Radon Zone 1 mean for Portland?: Portland sits mainly in Cumberland County, which the EPA classifies as Zone 1 - highest potential (predicted average > 4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 2.1 pCi/L does not line up with Zone 1, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

← All Maine counties and cities · Cumberland County · How to test · Methodology