Is radon high in Wilson, North Carolina?

Low. Averaging the model's ZIP-code predictions across Wilson (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.4 pCi/L - about 23% below the US average of 1.8 and about 15% below the North Carolina average of 1.7. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Wilson ranks 12 of 26 North Carolina cities on this site.

Which Wilson ZIP codes have the highest radon?

Predictions for the 3 modeled ZIP codes in Wilson range from 1.4 to 1.5 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in Wilson?

Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Wilson's low predicted average describes the typical home, not yours.

What does EPA Radon Zone 3 mean for Wilson?

Wilson sits mainly in Wilson County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

Radon levels in Wilson, North Carolina

LowEPA Zone 3

Predicted long-term basement average of 1.4 pCi/L (model estimate) across the 3 modeled ZIP codes in Wilson - about 23% below the US average of 1.8, about 15% below the North Carolina average of 1.7. Ranked #12 of 26 North Carolina cities on this site. Most of the city lies in Wilson County.

Test Wilson, NC once anyway - radon varies house to house

The predicted basement average here is 1.4 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

Get a short-term test kit →Or track it with a continuous monitor

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.4 ± 0.06

pCi/L predicted basement mean (model SD)

0.7 ± 0.07

pCi/L predicted upstairs (above-ground) mean

1.4-1.5

range of ZIP-level basement predictions in the city

of Wilson ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Wilson

The typical Wilson home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.4 to 1.5 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). The 1993 EPA zone (3) for Wilson and the 2001-2021 model agree here.

Comparable North Carolina cities: Concord (1.4), Rocky Mount (1.4), Charlotte (1.4), Greensboro (1.3).

ZIP codes in Wilson

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
27893	66%	1.4 ± 0.06	0.7	Low
27896	32%	1.4 ± 0.05	0.7	Low
27822	2%	1.5 ± 0.06	0.9	Low

Testing help in North Carolina

We link only state program pages we could verify, and North Carolina's did not respond when we checked, so start from the EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Wilson radon questions

Is radon high in Wilson, North Carolina?: Low. Averaging the model's ZIP-code predictions across Wilson (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.4 pCi/L - about 23% below the US average of 1.8 and about 15% below the North Carolina average of 1.7. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Wilson ranks 12 of 26 North Carolina cities on this site.
Which Wilson ZIP codes have the highest radon?: Predictions for the 3 modeled ZIP codes in Wilson range from 1.4 to 1.5 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Wilson?: Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Wilson's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 3 mean for Wilson?: Wilson sits mainly in Wilson County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

← All North Carolina counties and cities · Wilson County · How to test · Methodology