Is radon high in Midwest City, Oklahoma?

Low. Averaging the model's ZIP-code predictions across Midwest City (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.6 pCi/L - close to the US average of 1.8 and close to the Oklahoma average of 1.8. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Midwest City ranks 8 of 10 Oklahoma cities on this site.

Which Midwest City ZIP codes have the highest radon?

Predictions for the 4 modeled ZIP codes in Midwest City range from 1.5 to 1.8 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in Midwest City?

Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Midwest City's low predicted average describes the typical home, not yours.

What does EPA Radon Zone 3 mean for Midwest City?

Midwest City sits mainly in Oklahoma County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

Radon levels in Midwest City, Oklahoma

LowEPA Zone 3

Predicted long-term basement average of 1.6 pCi/L (model estimate) across the 4 modeled ZIP codes in Midwest City - close to the US average of 1.8, close to the Oklahoma average of 1.8. Ranked #8 of 10 Oklahoma cities on this site. Most of the city lies in Oklahoma County.

Test Midwest City, OK once anyway - radon varies house to house

The predicted basement average here is 1.6 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

Get a short-term test kit →Or track it with a continuous monitor

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.6 ± 0.07

pCi/L predicted basement mean (model SD)

0.8 ± 0.08

pCi/L predicted upstairs (above-ground) mean

1.5-1.8

range of ZIP-level basement predictions in the city

of Midwest City ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Midwest City

The typical Midwest City home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.5 to 1.8 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). The 1993 EPA zone (3) for Oklahoma and the 2001-2021 model agree here.

Comparable Oklahoma cities: Tulsa (1.6), Moore (1.7), Lawton (1.5), Broken Arrow (1.7).

ZIP codes in Midwest City

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
73110	44%	1.5 ± 0.07	0.7	Low
73130	40%	1.6 ± 0.07	0.8	Low
73141	10%	1.7 ± 0.07	0.9	Low
73020	5%	1.8 ± 0.06	0.9	Low

Testing help in Oklahoma

We link only state program pages we could verify, and Oklahoma's did not respond when we checked, so start from the EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Midwest City radon questions

Is radon high in Midwest City, Oklahoma?: Low. Averaging the model's ZIP-code predictions across Midwest City (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.6 pCi/L - close to the US average of 1.8 and close to the Oklahoma average of 1.8. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Midwest City ranks 8 of 10 Oklahoma cities on this site.
Which Midwest City ZIP codes have the highest radon?: Predictions for the 4 modeled ZIP codes in Midwest City range from 1.5 to 1.8 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Midwest City?: Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Midwest City's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 3 mean for Midwest City?: Midwest City sits mainly in Oklahoma County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

← All Oklahoma counties and cities · Oklahoma County · How to test · Methodology