Is radon high in Millcreek, Utah?

Low. Averaging the model's ZIP-code predictions across Millcreek (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 2.0 pCi/L - close to the US average of 1.8 and close to the Utah average of 2.3. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Millcreek ranks 19 of 22 Utah cities on this site.

Which Millcreek ZIP codes have the highest radon?

Predictions for the 6 modeled ZIP codes in Millcreek range from 1.7 to 2.5 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 67% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in Millcreek?

Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Millcreek's low predicted average describes the typical home, not yours.

What does EPA Radon Zone 2 mean for Millcreek?

Millcreek sits mainly in Salt Lake County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 2.0 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

Radon levels in Millcreek, Utah

LowEPA Zone 2

Predicted long-term basement average of 2.0 pCi/L (model estimate) across the 6 modeled ZIP codes in Millcreek - close to the US average of 1.8, close to the Utah average of 2.3. Ranked #19 of 22 Utah cities on this site. Most of the city lies in Salt Lake County.

Test Millcreek, UT once anyway - radon varies house to house

The predicted basement average here is 2.0 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

Get a short-term test kit →Or track it with a continuous monitor

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

2.0 ± 0.06

pCi/L predicted basement mean (model SD)

1.5 ± 0.07

pCi/L predicted upstairs (above-ground) mean

1.7-2.5

range of ZIP-level basement predictions in the city

of Millcreek ZIPs predicted ≥ 4 pCi/L (67% ≥ 2)

What this means for Millcreek

The typical Millcreek home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.7 to 2.5 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). Note that the EPA classifies Salt Lake County as Zone 2 while the newer model predicts 2.0 pCi/L for Millcreek; where they disagree, we grade on the model but show both.

Comparable Utah cities: Ogden (1.9), Layton (1.9), West Valley City (2.0), Eagle Mountain (2.1).

ZIP codes in Millcreek

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
84109	37%	1.7 ± 0.07	1.7	Low
84124	26%	1.9 ± 0.07	1.5	Low
84106	19%	2.3 ± 0.07	1.4	Moderate
84107	11%	2.1 ± 0.06	1.4	Moderate
84117	6%	2.5 ± 0.05	1.6	Moderate
84123	2%	2.3 ± 0.06	1.3	Moderate

Testing help in Utah

Utah's radon program page is at deq.utah.gov and, when we checked it, offered a low-cost test kit ordered online. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Millcreek radon questions

Is radon high in Millcreek, Utah?: Low. Averaging the model's ZIP-code predictions across Millcreek (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 2.0 pCi/L - close to the US average of 1.8 and close to the Utah average of 2.3. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Millcreek ranks 19 of 22 Utah cities on this site.
Which Millcreek ZIP codes have the highest radon?: Predictions for the 6 modeled ZIP codes in Millcreek range from 1.7 to 2.5 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 67% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Millcreek?: Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Millcreek's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 2 mean for Millcreek?: Millcreek sits mainly in Salt Lake County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 2.0 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

← All Utah counties and cities · Salt Lake County · How to test · Methodology