Is radon high in Arlington, Virginia?

Low. Averaging the model's ZIP-code predictions across Arlington (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.1 pCi/L - about 38% below the US average of 1.8 and about 31% below the Virginia average of 1.6. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Arlington ranks 20 of 21 Virginia cities on this site.

Which Arlington ZIP codes have the highest radon?

Predictions for the 9 modeled ZIP codes in Arlington range from 0.9 to 1.4 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.

Should I test for radon in Arlington?

Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Arlington's low predicted average describes the typical home, not yours.

What does EPA Radon Zone 2 mean for Arlington?

Arlington sits mainly in Arlington County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.1 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

Radon levels in Arlington, Virginia

LowEPA Zone 2

Predicted long-term basement average of 1.1 pCi/L (model estimate) across the 9 modeled ZIP codes in Arlington - about 38% below the US average of 1.8, about 31% below the Virginia average of 1.6. Ranked #20 of 21 Virginia cities on this site. Most of the census-designated place lies in Arlington County.

Test Arlington, VA once anyway - radon varies house to house

The predicted basement average here is 1.1 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

Get a short-term test kit →Or track it with a continuous monitor

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.1 ± 0.08

pCi/L predicted basement mean (model SD)

0.8 ± 0.08

pCi/L predicted upstairs (above-ground) mean

0.9-1.4

range of ZIP-level basement predictions in the city

of Arlington ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Arlington

The typical Arlington home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 0.9 to 1.4 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the census-designated place's land in each ZIP (Census 2020 ZCTA-to-place relationship file). Note that the EPA classifies Arlington County as Zone 2 while the newer model predicts 1.1 pCi/L for Arlington; where they disagree, we grade on the model but show both.

Comparable Virginia cities: Norfolk (1.2), Reston (1.2), Centreville (1.2), Portsmouth (1.2).

ZIP codes in Arlington

ZIPs that overlap the census-designated place, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIP	Share of city	Basement	Upstairs	Grade
22207	25%	1.4 ± 0.09	1.1	Low
22204	16%	1.0 ± 0.07	0.7	Low
22202	15%	1.0 ± 0.07	0.6	Low
22205	11%	1.2 ± 0.10	0.9	Low
22201	9%	0.9 ± 0.09	0.6	Low
22206	8%	1.1 ± 0.07	0.7	Low
22203	6%	1.0 ± 0.06	0.7	Low
22211	4%	—	—	no model
22209	3%	1.0 ± 0.07	0.6	Low
22213	2%	1.3 ± 0.06	1.0	Low
22214	2%	—	—	no model

Testing help in Virginia

Virginia's radon program page is at www.vdh.virginia.gov and, when we checked it, offered discounted radon test kits. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Arlington radon questions

Is radon high in Arlington, Virginia?: Low. Averaging the model's ZIP-code predictions across Arlington (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.1 pCi/L - about 38% below the US average of 1.8 and about 31% below the Virginia average of 1.6. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Arlington ranks 20 of 21 Virginia cities on this site.
Which Arlington ZIP codes have the highest radon?: Predictions for the 9 modeled ZIP codes in Arlington range from 0.9 to 1.4 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Arlington?: Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Arlington's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 2 mean for Arlington?: Arlington sits mainly in Arlington County, which the EPA classifies as Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and covers whole counties. The newer model's city average of 1.1 pCi/L does not line up with Zone 2, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

← All Virginia counties and cities · Arlington County · How to test · Methodology