Radon levels in Franklin County, Indiana

ModerateEPA Zone 2

Predicted long-term basement average of 2.8 pCi/L (model estimate) across 7 ZIP codes - about 1.5× the US average of 1.8, about 1.2× the Indiana average of 2.3. Ranked #32 of 92 Indiana counties.

Test Franklin County, IN - the EPA says "consider fixing" in this range

The predicted basement average here is 2.8 pCi/L, in the 2-4 pCi/L band where the EPA recommends considering mitigation. Plenty of individual homes in a moderate area test above 4. Start with a short-term test; if it comes back at 2 or higher, follow up with a long-term test or a continuous monitor.

Already tested at 4 pCi/L or higher? Find a certified mitigation professional (EPA). A mitigation system typically runs $800-$2,500 installed.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

2.8 ± 0.05

pCi/L predicted basement mean (model SD)

1.6 ± 0.06

pCi/L predicted upstairs (above-ground) mean

1.5-3.2

range of ZIP-level basement predictions in the county

What this means for Franklin

The typical Franklin County home is predicted in the 2-4 pCi/L band. The EPA's guidance for this range is to consider fixing, because there is no known safe level and roughly one home in several in a moderate area will test above 4.

The 1993 EPA zone (2) and the 2001-2021 model agree for Franklin. County figures weight each ZIP by its 2010 Census population, so they describe where people live rather than empty land.

Comparable Indiana counties: White County (2.8), Putnam County (2.8), Steuben County (2.8), Fulton County (2.8). The state's highest is Blackford County at 3.5 pCi/L.

ZIP codes in Franklin County

Predicted basement and upstairs means by ZIP (model estimate). ZIPs whose land is mostly in this county.

ZIPBasementUpstairsGrade
470123.2 ± 0.051.8Moderate
470242.1 ± 0.051.1Moderate
470302.0 ± 0.061.1Low
470362.0 ± 0.061.4Moderate
470162.9 ± 0.061.8Moderate
470102.8 ± 0.061.7Moderate
470351.5 ± 0.070.9Low

If your test comes back at 4 pCi/L or higher

Mitigation is a routine job: a fan-driven pipe that vents soil gas from under the slab to above the roofline, typically $800-$2,500 installed (typical range; local quotes vary). Use certified professionals: EPA find-a-professional. Read the full mitigation guide.

Franklin County radon questions

Is radon high in Franklin County, Indiana?
Moderate. The model predicts a long-term basement average of 2.8 pCi/L in Franklin County (about 1.5× the US average of 1.8 and about 1.2× the Indiana average of 2.3). That is in the 2-4 pCi/L range where the EPA recommends considering mitigation. Ranked 32 of 92 Indiana counties.
Should I test for radon in Franklin County?
Yes, soon. With a predicted average of 2.8 pCi/L, many homes in Franklin County will test above the 4 pCi/L action level. Use a short-term kit first; if it reads 2 or higher, confirm with a long-term test or continuous monitor before deciding on mitigation.
What does EPA Radon Zone 2 mean for Franklin County?
Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and classifies whole counties. The 2001-2021 model agrees with the zone here. Neither replaces a test of your own home.
How much does radon mitigation cost in Franklin County?
A standard active sub-slab depressurization system typically runs $800-$2,500 installed nationally; Indiana quotes vary with foundation type (slab, crawlspace, basement), home size and local labor. Get two or three bids from certified mitigators listed by your state radon program or the EPA's find-a-professional page.

← All Indiana counties · How to test · Radon in a home sale · Methodology