Radon levels in Gibson County, Indiana

ModerateEPA Zone 2

Predicted long-term basement average of 2.0 pCi/L (model estimate) across 10 ZIP codes - close to the US average of 1.8, close to the Indiana average of 2.3. Ranked #79 of 92 Indiana counties.

Test Gibson County, IN - the EPA says "consider fixing" in this range

The predicted basement average here is 2.0 pCi/L, in the 2-4 pCi/L band where the EPA recommends considering mitigation. Plenty of individual homes in a moderate area test above 4. Start with a short-term test; if it comes back at 2 or higher, follow up with a long-term test or a continuous monitor.

Already tested at 4 pCi/L or higher? Find a certified mitigation professional (EPA). A mitigation system typically runs $800-$2,500 installed.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

2.0 ± 0.05

pCi/L predicted basement mean (model SD)

1.2 ± 0.06

pCi/L predicted upstairs (above-ground) mean

1.4-2.1

range of ZIP-level basement predictions in the county

What this means for Gibson

The typical Gibson County home is predicted in the 2-4 pCi/L band. The EPA's guidance for this range is to consider fixing, because there is no known safe level and roughly one home in several in a moderate area will test above 4.

The 1993 EPA zone (2) and the 2001-2021 model agree for Gibson. County figures weight each ZIP by its 2010 Census population, so they describe where people live rather than empty land.

Comparable Indiana counties: Martin County (2.0), Greene County (2.0), Sullivan County (2.0), Switzerland County (2.0). The state's highest is Blackford County at 3.5 pCi/L.

ZIP codes in Gibson County

Predicted basement and upstairs means by ZIP (model estimate). ZIPs whose land is mostly in this county.

ZIPBasementUpstairsGrade
476702.0 ± 0.051.2Moderate
476602.0 ± 0.061.1Moderate
476482.1 ± 0.051.1Moderate
476392.0 ± 0.061.2Moderate
476652.0 ± 0.051.3Moderate
476661.9 ± 0.061.1Low
476491.8 ± 0.061.0Low
476401.9 ± 0.061.2Low
476121.8 ± 0.061.0Low
476161.4 ± 0.060.9Low

If your test comes back at 4 pCi/L or higher

Mitigation is a routine job: a fan-driven pipe that vents soil gas from under the slab to above the roofline, typically $800-$2,500 installed (typical range; local quotes vary). Use certified professionals: EPA find-a-professional. Read the full mitigation guide.

Gibson County radon questions

Is radon high in Gibson County, Indiana?
Moderate. The model predicts a long-term basement average of 2.0 pCi/L in Gibson County (close to the US average of 1.8 and close to the Indiana average of 2.3). That is in the 2-4 pCi/L range where the EPA recommends considering mitigation. Ranked 79 of 92 Indiana counties.
Should I test for radon in Gibson County?
Yes, soon. With a predicted average of 2.0 pCi/L, many homes in Gibson County will test above the 4 pCi/L action level. Use a short-term kit first; if it reads 2 or higher, confirm with a long-term test or continuous monitor before deciding on mitigation.
What does EPA Radon Zone 2 mean for Gibson County?
Zone 2 - moderate potential (2-4 pCi/L). The zone map dates from 1993 and classifies whole counties. The 2001-2021 model agrees with the zone here. Neither replaces a test of your own home.
How much does radon mitigation cost in Gibson County?
A standard active sub-slab depressurization system typically runs $800-$2,500 installed nationally; Indiana quotes vary with foundation type (slab, crawlspace, basement), home size and local labor. Get two or three bids from certified mitigators listed by your state radon program or the EPA's find-a-professional page.

← All Indiana counties · How to test · Radon in a home sale · Methodology