Is radon high in Bristol city, Virginia?

Moderate. The model predicts a long-term basement average of 2.7 pCi/L in Bristol city (about 1.5× the US average of 1.8 and about 1.7× the Virginia average of 1.6). That is in the 2-4 pCi/L range where the EPA recommends considering mitigation. Ranked 20 of 112 Virginia counties.

Should I test for radon in Bristol city?

Yes, soon. With a predicted average of 2.7 pCi/L, many homes in Bristol city will test above the 4 pCi/L action level. Use a short-term kit first; if it reads 2 or higher, confirm with a long-term test or continuous monitor before deciding on mitigation.

What does EPA Radon Zone 1 mean for Bristol city?

Zone 1 - highest potential (predicted average > 4 pCi/L). The zone map dates from 1993 and classifies whole counties. The newer model's predicted average of 2.7 pCi/L does not line up with Zone 1, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.

How much does radon mitigation cost in Bristol city?

A standard active sub-slab depressurization system typically runs $800-$2,500 installed nationally; Virginia quotes vary with foundation type (slab, crawlspace, basement), home size and local labor. Get two or three bids from certified mitigators listed by your state radon program or the EPA's find-a-professional page.

Radon levels in Bristol city, Virginia

ModerateEPA Zone 1

Predicted long-term basement average of 2.7 pCi/L (model estimate) across 1 ZIP codes - about 1.5× the US average of 1.8, about 1.7× the Virginia average of 1.6. Ranked #20 of 112 Virginia counties.

Test Bristol city, VA - the EPA says "consider fixing" in this range

The predicted basement average here is 2.7 pCi/L, in the 2-4 pCi/L band where the EPA recommends considering mitigation. Plenty of individual homes in a moderate area test above 4. Start with a short-term test; if it comes back at 2 or higher, follow up with a long-term test or a continuous monitor.

Get a short-term test kit →Or track it with a continuous monitor

Already tested at 4 pCi/L or higher? Find a certified mitigation professional (EPA). A mitigation system typically runs $800-$2,500 installed.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

2.7 ± 0.05

pCi/L predicted basement mean (model SD)

2.0 ± 0.06

pCi/L predicted upstairs (above-ground) mean

2.7-2.7

range of ZIP-level basement predictions in the county

What this means for Bristol city

The typical Bristol city home is predicted in the 2-4 pCi/L band. The EPA's guidance for this range is to consider fixing, because there is no known safe level and roughly one home in several in a moderate area will test above 4.

Note that the EPA classifies Bristol city as Zone 1 while the newer model predicts 2.7 pCi/L. The zone map predates two decades of test data; where they disagree, we grade on the model but show both. County figures weight each ZIP by its 2010 Census population, so they describe where people live rather than empty land.

Comparable Virginia counties: Augusta County (2.7), Patrick County (2.7), Highland County (2.8), Bland County (2.8). The state's highest is Wythe County at 3.3 pCi/L.

ZIP codes in Bristol city

Predicted basement and upstairs means by ZIP (model estimate). ZIPs whose land is mostly in this county.

ZIP	Basement	Upstairs	Grade
24201	2.7 ± 0.05	2.0	Moderate

If your test comes back at 4 pCi/L or higher

Mitigation is a routine job: a fan-driven pipe that vents soil gas from under the slab to above the roofline, typically $800-$2,500 installed (typical range; local quotes vary). Use certified professionals: EPA find-a-professional. Read the full mitigation guide.

Bristol city radon questions

Is radon high in Bristol city, Virginia?: Moderate. The model predicts a long-term basement average of 2.7 pCi/L in Bristol city (about 1.5× the US average of 1.8 and about 1.7× the Virginia average of 1.6). That is in the 2-4 pCi/L range where the EPA recommends considering mitigation. Ranked 20 of 112 Virginia counties.
Should I test for radon in Bristol city?: Yes, soon. With a predicted average of 2.7 pCi/L, many homes in Bristol city will test above the 4 pCi/L action level. Use a short-term kit first; if it reads 2 or higher, confirm with a long-term test or continuous monitor before deciding on mitigation.
What does EPA Radon Zone 1 mean for Bristol city?: Zone 1 - highest potential (predicted average > 4 pCi/L). The zone map dates from 1993 and classifies whole counties. The newer model's predicted average of 2.7 pCi/L does not line up with Zone 1, which is common - the EPA itself says high-radon homes exist in every zone. Neither replaces a test of your own home.
How much does radon mitigation cost in Bristol city?: A standard active sub-slab depressurization system typically runs $800-$2,500 installed nationally; Virginia quotes vary with foundation type (slab, crawlspace, basement), home size and local labor. Get two or three bids from certified mitigators listed by your state radon program or the EPA's find-a-professional page.

← All Virginia counties · How to test · Radon in a home sale · Methodology