Radon levels in Auburn, Washington

LowEPA Zone 3

Predicted long-term basement average of 1.5 pCi/L (model estimate) across the 3 modeled ZIP codes in Auburn - about 19% below the US average of 1.8, close to the Washington average of 1.6. Ranked #12 of 29 Washington cities on this site. Most of the city lies in King County.

Test Auburn, WA once anyway - radon varies house to house

The predicted basement average here is 1.5 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.

We may earn a commission from Amazon at no extra cost to you.

Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.

1.5 ± 0.06

pCi/L predicted basement mean (model SD)

0.6 ± 0.08

pCi/L predicted upstairs (above-ground) mean

1.4-1.5

range of ZIP-level basement predictions in the city

0%

of Auburn ZIPs predicted ≥ 4 pCi/L (0% ≥ 2)

What this means for Auburn

The typical Auburn home is predicted below 2 pCi/L, the lowest band. That describes the average house; the ZIP-level predictions inside the city still span 1.4 to 1.5 pCi/L.

The city figure is not a separate estimate: it is the mean of the model's ZIP-code predictions, weighted by the share of the city's land in each ZIP (Census 2020 ZCTA-to-place relationship file). The 1993 EPA zone (3) for King and the 2001-2021 model agree here.

Comparable Washington cities: Bellingham (1.5), South Hill (1.5), Olympia (1.4), Tacoma (1.4).

ZIP codes in Auburn

ZIPs that overlap the city, largest share of its land first. Predicted basement and upstairs means are model estimates; ZIPs the model does not cover show a dash.

ZIPShare of cityBasementUpstairsGrade
9809248%1.5 ± 0.060.6Low
9800128%1.5 ± 0.060.6Low
9800224%1.5 ± 0.060.6Low

Testing help in Washington

Washington's radon program page is at doh.wa.gov and, when we checked it, offered a limited supply of free radon test kits. EPA state radon contacts page. If a test comes back at 4 pCi/L or higher, mitigation typically costs $800-$2,500 installed; use EPA find-a-professional and read the mitigation guide.

Auburn radon questions

Is radon high in Auburn, Washington?
Low. Averaging the model's ZIP-code predictions across Auburn (weighted by how much of the city each ZIP covers) gives a long-term basement mean of 1.5 pCi/L - about 19% below the US average of 1.8 and close to the Washington average of 1.6. That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Auburn ranks 12 of 29 Washington cities on this site.
Which Auburn ZIP codes have the highest radon?
Predictions for the 3 modeled ZIP codes in Auburn range from 1.4 to 1.5 pCi/L in the basement. 0% of them are predicted at or above 4 pCi/L and 0% at or above 2. The city is fairly uniform, so the city-wide number is a reasonable guide for any neighborhood.
Should I test for radon in Auburn?
Yes, once. The EPA recommends testing every home regardless of area. A short-term kit costs little and settles the question for your house; Auburn's low predicted average describes the typical home, not yours.
What does EPA Radon Zone 3 mean for Auburn?
Auburn sits mainly in King County, which the EPA classifies as Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and covers whole counties. The 2001-2021 model agrees with the zone for the city. Neither replaces a test of your own home.

← All Washington counties and cities · King County · How to test · Methodology