Radon levels in Franklin County, New York
LowEPA Zone 3Predicted long-term basement average of 1.7 pCi/L (model estimate) across 19 ZIP codes - close to the US average of 1.8, about 1.2× the New York average of 1.4. Ranked #39 of 62 New York counties.
Test Franklin County, NY once anyway - radon varies house to house
The predicted basement average here is 1.7 pCi/L, below the EPA's 2 pCi/L "consider fixing" threshold. That's good news for the area - but the EPA still recommends every home be tested, because foundation cracks, soil pockets and ventilation make one house very different from its neighbor. One inexpensive kit settles it.
We may earn a commission from Amazon at no extra cost to you.
Predicted (model estimate). The pCi/L figures on this page are long-term area averages from a peer-reviewed national model built on millions of real radon tests (2001-2021). They describe the typical home in this area - not your home, which can be several times higher or lower. The EPA radon zone is a separate, 1993 county-level classification. How the numbers work.
1.7 ± 0.06
pCi/L predicted basement mean (model SD)
0.8 ± 0.11
pCi/L predicted upstairs (above-ground) mean
1.5-1.9
range of ZIP-level basement predictions in the county
What this means for Franklin
The typical Franklin County home is predicted below 2 pCi/L, the lowest band. That is the best case an area can show - but it describes the average house, and the ZIP-level predictions within the county still span 1.5 to 1.9 pCi/L.
The 1993 EPA zone (3) and the 2001-2021 model agree for Franklin. County figures weight each ZIP by its 2010 Census population, so they describe where people live rather than empty land.
Comparable New York counties: Essex County (1.7), Wayne County (1.6), Saratoga County (1.7), Montgomery County (1.6). The state's highest is Schuyler County at 2.8 pCi/L.
ZIP codes in Franklin County
Predicted basement and upstairs means by ZIP (model estimate). ZIPs whose land is mostly in this county.
| ZIP | Basement | Upstairs | Grade |
|---|---|---|---|
| 12953 | 1.6 ± 0.06 | 0.8 | Low |
| 12983 | 1.7 ± 0.06 | 0.7 | Low |
| 12986 | 1.7 ± 0.06 | 0.5 | Low |
| 13655 | 1.5 ± 0.06 | 0.8 | Low |
| 12966 | 1.8 ± 0.05 | 1.0 | Low |
| 12920 | 1.9 ± 0.06 | 1.0 | Low |
| 12926 | 1.8 ± 0.05 | 1.0 | Low |
| 12916 | 1.7 ± 0.05 | 1.0 | Low |
| 12957 | 1.6 ± 0.05 | 0.8 | Low |
| 12937 | 1.7 ± 0.06 | 1.0 | Low |
| 12917 | 1.7 ± 0.06 | 1.0 | Low |
| 12980 | 1.7 ± 0.06 | 0.8 | Low |
| 12913 | 1.8 ± 0.06 | 0.8 | Low |
| 12914 | 1.5 ± 0.06 | 0.9 | Low |
| 12989 | 1.8 ± 0.05 | 0.9 | Low |
| 12970 | 1.7 ± 0.07 | 0.8 | Low |
| 12945 | 1.6 ± 0.06 | 0.8 | Low |
| 12930 | 1.7 ± 0.06 | 0.9 | Low |
| 12969 | 1.5 ± 0.06 | 0.7 | Low |
If your test comes back at 4 pCi/L or higher
Mitigation is a routine job: a fan-driven pipe that vents soil gas from under the slab to above the roofline, typically $800-$2,500 installed (typical range; local quotes vary). Use certified professionals: EPA find-a-professional. Read the full mitigation guide.
Franklin County radon questions
- Is radon high in Franklin County, New York?
- Low. The model predicts a long-term basement average of 1.7 pCi/L in Franklin County (close to the US average of 1.8 and about 1.2× the New York average of 1.4). That is below the EPA's 2 pCi/L "consider fixing" threshold, though individual homes still vary. Ranked 39 of 62 New York counties.
- Should I test for radon in Franklin County?
- Yes, once. The EPA recommends testing every home regardless of area, and the model's ZIP-level predictions in Franklin County already range from 1.5 to 1.9 pCi/L. A short-term kit costs little and settles the question for your house.
- What does EPA Radon Zone 3 mean for Franklin County?
- Zone 3 - low potential (< 2 pCi/L). The zone map dates from 1993 and classifies whole counties. The 2001-2021 model agrees with the zone here. Neither replaces a test of your own home.
- How much does radon mitigation cost in Franklin County?
- A standard active sub-slab depressurization system typically runs $800-$2,500 installed nationally; New York quotes vary with foundation type (slab, crawlspace, basement), home size and local labor. Get two or three bids from certified mitigators listed by your state radon program or the EPA's find-a-professional page.
← All New York counties · How to test · Radon in a home sale · Methodology